scorpion bullwhip

Topics related to brands other then JD
Post Reply
storm_00

scorpion bullwhip

Post by storm_00 »

hey guys anyone have any info on this motor an if so can ya send me some ,mainly I am lookin for a service manual but if ya happen to know where a bullwhip chassis is that would be great too .PS if ya have any sno to spare it sure would be nice if ya could send it this way
wadeo108
Posts: 143
Joined: Sun Jul 17, 2005 12:00 am
Location: coon rapids mn

scorpion bullwhip

Post by wadeo108 »

which one are you looking for the info? the bullwhip and the bruit used different motors.
X's&O's

scorpion bullwhip

Post by X's&O's »

Scorrpion Brut

ENGINE MODEL LC34
Bore-(mm)................. 62
inches...................... 2.441
Stroke-(mm).............. 55.6
inces......................... 2.189
No. of cylinders........... 2
Displacement-(cc)....... 335.7
Horsepower at RPM..... 20.4
standard...................
stock tuned...............
Cooling Type.............. Liquid Cooled
Carburetor Make........ Mikuni
Model....................... VM32
Number used............. 2
Ignition Type.............. ET
make........................ Kokusan Denk.
point Gap-(mm).........0.4
Inch....................... 0.015
Timing Advance?......... Yes
Timing Checked at...... Adv.
setting..................... 20-30 deg.
Spark plug:
NGK........................ B8ES
Electrode Gap -(mm).. 0.45
inch......................... 0.018
Fuel/oil Ratio.............. 20:1

Hope this helps.
Post Reply