Jd Helmet I Done

deereboy · Post by **deereboy** » Sat Feb 07, 2009 5:53 pm

JUST FINNISHED MY HELMENT. I TRACED SOME SHRUNK DOWN
DEERE AND SNOWMOBILE LOGOS ON MASKIT.THEN SANDED
HELMET TO GET GRAPHICS SMOOTH.SPRAYED ON SEALER TO
HOLD DOWN LIFTING.WET SANDED WITH 800 GRIT.AFTER THAT
I SPRAYED THE YELLOW PUT ON THE TAPE STRIPES AND LOGOS
I MADE,THEN SPRAYED GREEN.THEN I PEELED OFF STRIPES AND
LOGOS THEN I CLEAR COATED IT. WET SANDED WITH 2000 GRIT
AND BUFFED TO HIGH GLOSS WITH NO RIDGES WHERE THE STRIPES
AND STUFF WOULD BE.WENT KINDA SUDDLE SINCE I AM OLD. STILL
NEED TO DO ANOTHER FOR MY WIFE SO ANY DIFFERNT IDEAS WOULD
BE GREATLY APPRECIATED.POSTED SOME PICS BELLOW.

THANKS
DEEREBOY

Attachments:

deereboy · Post by **deereboy** » Sat Feb 07, 2009 5:56 pm

AND TWO MORE

Attachments:

DevonV · Post by **DevonV** » Sat Feb 07, 2009 5:58 pm

was that a raider helmet?

deereboy · Post by **deereboy** » Sat Feb 07, 2009 6:04 pm

YES IT IS, A NEW BLACK & SILVER ONE. HARD TO FIND A PLAIN GREEN
ONE TO MAKE INTO JD.
DEEREBOY

DevonV · Post by **DevonV** » Sat Feb 07, 2009 6:08 pm

nice work

Cabindweller · Post by **Cabindweller** » Sat Feb 07, 2009 6:46 pm

That looks Great!

Will_jdx · Post by **Will_jdx** » Sat Feb 07, 2009 7:01 pm

Looks Nice. You need to make one that has JDX on it. I would buy that one!!!

Will

Caleb55 · Post by **Caleb55** » Sat Feb 07, 2009 7:52 pm

Very nice job!! I toast you!

Liquifire 4/6 · Post by **Liquifire 4/6** » Sat Feb 07, 2009 8:49 pm

Fantastic job! I'd be pretty proud to have one of those.

JDFanPa · Post by **JDFanPa** » Sun Feb 08, 2009 3:32 am

that is very nice now how about a blitz black helmet

malone · Post by **malone** » Sun Feb 08, 2009 4:38 am

That is a cool helmet..

nice job!!

Mr. Deere · Post by **Mr. Deere** » Sun Feb 08, 2009 5:05 pm

Wow Nice job.

Sprailfire340 · Post by **Sprailfire340** » Mon Feb 09, 2009 3:10 am

Very nice work. Are you interested in doing another one? My wife told me I can ride any of these old sleds I want, but I can not use a 30yr old helmet. That piece of equipment can not be vintage.