Trailfire carb setting

Technical topics related to machines powered by Kasasaki motors
Post Reply
User avatar
kreechur
Posts: 86
Joined: Fri Sep 04, 2009 4:40 pm
Location: Watertown, Wisconsin

Trailfire carb setting

Post by kreechur »

Looking in the service manual it said during carb assembly that air screw should be two turns out, then during the cable setting it said air screw should be 1.5 turns and in the carb spec chart it shows one turn where should air screw be? This is an 80 440
  • 2 1970 Moto-Ski MS-18
    2 1969 Mercury 250ER
    2 1971 Evinrude Skeeter
    1 1979 JD Spitfire 340
    1 1980 JD Trailfire 440
    1 1976 JD 400
    1 1974 Scorpion Whip
    1 1989 Ski-Doo Formula MX/LT
    1 1994 Ski-Doo Formula STX
Top
trailfire runner
Posts: 198
Joined: Sat Mar 05, 2011 8:10 pm
Location: 43302

Re: Trailfire carb setting

Post by trailfire runner »

one turn out

Clay
Clay Gerfen
My Sleds
1 1980 Trailfire 340 = Less than five hundred orginal miles
1 1980 Trailfire 440 = My Test Dummy
1 1980 Liquifire = Future race sled
1 1978 Spitfire
1 1979 Spitfire
Top
Post Reply

Return to “Kawasaki Tech Talk”