Did that, remounted the plug wires to the coils, put new gaskets and diaphragm in the carb today and put it together and it was good to go. The old diaphragm was too stiff and wasnt pumping at idle and low rpm.
'74 400 runs for 5 seconds and dies.
-
cpolaris502
- Posts: 33
- Joined: Mon Dec 12, 2011 11:52 pm
- Location: Minnesota
Re: '74 400 runs for 5 seconds and dies.
OK... i think I'm done with it and have it running for good now. Replaced the condensor yesterday. Due to mounting differences, it rubbed on the timing cam in the flywheel and wore a hole.
Did that, remounted the plug wires to the coils, put new gaskets and diaphragm in the carb today and put it together and it was good to go. The old diaphragm was too stiff and wasnt pumping at idle and low rpm.
Did that, remounted the plug wires to the coils, put new gaskets and diaphragm in the carb today and put it together and it was good to go. The old diaphragm was too stiff and wasnt pumping at idle and low rpm.
1974 JD 400
-
400brian
- Posts: 5703
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: '74 400 runs for 5 seconds and dies.
That would do it! Good job! 
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
cpolaris502
- Posts: 33
- Joined: Mon Dec 12, 2011 11:52 pm
- Location: Minnesota
Re: '74 400 runs for 5 seconds and dies.
A big thanks to you Brian and everyone else on this board. I will post a thread in the projects area when I finally get a chance to sit in front of the computer long enough to write everything out. I've got so much labor into this thing.
1974 JD 400