What am I doing wrong????
What am I doing wrong????
I've been working on my 81 sportfire with which I had had electrical problems with before (brown wire from stator getting hot). I replaced the stator with a new one hooked the wirers up as per wiring diagram, brown wire from stator to black wire to ground. When I got everything together and tried to start it (electric start) the brown wire would start to get warm when I turned the key all the way over, didn't seem to bother if the key was just on only when I tried to engage the starter. I haven't tried to start it manually yet and I have checked the instructions that came with the electric start kit and everything seems to be where it should just can't figure out what I have wrong or am doing wrong or what to look for. This one has got me stumped ANYBODY got any ideas. Thanks
- JDXspec
- Posts: 896
- Joined: Thu Jul 21, 2005 12:00 am
- Real Name: Dustin
- Location: SW Minnesota
- Contact:
Re: What am I doing wrong????
How is your eng grounded? Do you have the battery cable grounded to the actual engine or the frame?
Own 74 295/s, 75 340/S, 800, 76 440 Liquifire, 300, Liquidator (3), 78 440 Liquifire, 340 Liquifire CC, 80 Liquifire, 82 Trailfire LX, 83 Sprintfire 84 Sportfire
Re: What am I doing wrong????
It's grounded to the frame.
Re: What am I doing wrong????
All electric starts need a ground cable from the battery to the engine or the frame to the engine.
The engine sits on rubber isolation blocks to prevent vibration.. These rubber blocks do not pass current so the ground is forced through your wiring harness ground wire and to the stator plate which is at engine ground. Hence a hot or melted brown/black wire.
Grab a 8 Gauge ground cable from NAPA or whereever for $5 and problem solved.
The engine sits on rubber isolation blocks to prevent vibration.. These rubber blocks do not pass current so the ground is forced through your wiring harness ground wire and to the stator plate which is at engine ground. Hence a hot or melted brown/black wire.
Grab a 8 Gauge ground cable from NAPA or whereever for $5 and problem solved.
Todd Schrupp
Milbank SD
Milbank SD
-
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: What am I doing wrong????
I would suggest grounding it to both the engine & frame..
Just my $.0675 worth
Grumpy
Just my $.0675 worth
Grumpy
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
Re: What am I doing wrong????
Grumpy has once again pointed out my issue with poor explanations.
In addition to the ground cable from the battery to the frame there should be a second cable from the frame to the engine or the battery to the engine.
In addition to the ground cable from the battery to the frame there should be a second cable from the frame to the engine or the battery to the engine.
Todd Schrupp
Milbank SD
Milbank SD
Re: What am I doing wrong????
I got a cable this morning so we'll see how it goes. Thanks everyone for the info. Will let you know how it goes.
Re: What am I doing wrong????
Well got the cable hooked up from the engine to the frame and it worked like a charm. I don't know why it worked before without being grounded but it did. Could of been grounded some how and it didn't show up until after the red stator wire broke and I took the motor out to fix it then didn't get a good ground after that. Bottom line is that it works now and that's what matters. One question though and that is does this rule of thumb apply to all JD electric start sleds or just the "Fire" series? The reason I ask is that my JDX4 is electric start and I know that it's not grounded also and would a person want to ground it to be on the safe side? Once again thanks for all the help and ideas.
Re: What am I doing wrong????
Any sled with an electric starter needs a ground cable from to the engine(starter) and the chassis(frame).
Todd Schrupp
Milbank SD
Milbank SD