1983 Liquifire / Parting Out

[427cobra]

I picked up an 83' LF over the weekend for the ignition parts.

Its pretty complete machine but in rough shape. I plan on parting it out. After I get the igintion parts removed.

Someone added drop brackets to the rear suspension. So the back end sits about 3" higher than stock!

Let me know what you need.
-No windshield or seat

Ill try and get some pictures posted tonight or tomorrow.

[smitfire]

I may be interested in the motor and carbs.
Maybe you can do your magic and put new seals in it for me.
I can send a late ignition too if needed.

[427cobra]

Engine feels rough. I think something is wrong internally. I may have time to dig into it further this week.

TR800 clutch for parts. $40.00
Perfect dash and gauges . $55.00

I'll also want to sell the chassis once the motor is removed.

I'll get some pictures posted later.

[smitfire]

I have many good parts I can send you crank, cylinder... I'm mainly just after the cases so I can build a 1980 liquifire with electric start, late ignition.

[427cobra]

Dustin I can help you out with the carbs send me a PM.

I dont have the time to build an engine right now...sorry. Here are a few pics of the sled.

Let me know what you guys need and shoot me an offer.

TPR's look decent, bumper, hood has 1 crack, good gas tank (with latching door), the list goes on....

Thanks!

[monte44]

Pm sent

[DANO]

I would be interested in purchasing the following.
1. Hood cable spring
2. spindle bushings and ski bolts
3. two ski's and springs
Dan Gorder- dgorder@truenorthequipment.com

[427cobra]

1.The spring isn’t the correct one. Looks like an oil tank spring. Ill throw it in for free.
2. I hope to have time next week to pull the motor and front end apart and will let you know if the bushings are good
3.The skis are junk. But I do have a nice pair from a 80LF. I will take a closer look at the springs when I take the front end apart

Thanks for the interest and Ill get back to you!

Eric
815-five79-1four84 - cell

[427cobra]

Carbs are Sold

Anyone interested in the bare chassis? Id hate to scrap it if someone could use it... The tunnel, belly pan, bumber, TPR's are all usable.

I dont have the room to store it long term

Might have time next week to get it all stripped down.

[427cobra]

Dash is sold.

[427cobra]

tunnel & bulkhead - sold
hood - sold
track - sold
exhaust - sold

Still a few parts left:

TR800 Clutch for parts - Sold
Chain Case - $20.00
Track Drive - $40.00

Let me know what other items you need...

[sledder670]

Right side bumper cap?? I may need it by next week.

[427cobra]

Dont have any other loose ones.

Sorry

[WinnipegStPaul9]

Oil tank spring available?

DA

[427cobra]

No spring available, sorry