1980 Liquifire Project

Packers29 · Post by **Packers29** » Sat Jan 03, 2015 3:14 pm

My day consisted of driving 6 hours to get her

Sent from my iPhone using Tapatalk

nick80lf · Post by **nick80lf** » Sat Jan 03, 2015 4:30 pm

So us more. So far looks like a really nice one.

Sent from my HTC One_M8 using Tapatalk

Packers29 · Post by **Packers29** » Sat Jan 03, 2015 9:10 pm

I'll post so more in the daylight tommorow

Sent from my iPhone using Tapatalk

Packers29 · Post by **Packers29** » Sat Jan 03, 2015 11:33 pm

Bad picture but a picture anyways

sledhead16 · Post by **sledhead16** » Sun Jan 04, 2015 9:34 am

You'll see that locating original LF dashes that aren't cracked is getting tougher, I have three cracked ones on my shelf and just found an original non cracked one for my LF 6 months ago. Your handle bars are in nicer shape than mine and your tie rod looks straight so thats good. Looks like you need a different recoil handle. Almost all of the throttle blocks that I have, have small cracks by the setscrew but some guys put some dabs of epoxy on them to help hold. your hood looks good and seat as well nice! I have more JD skeletons out back than I do sitting in the garage but I think thats how it usually goes lol! My two that I re did are just riders far from perfect lol but fun! what are your plans for this ol girl we'd all like to hear!

-AC

Packers29 · Post by **Packers29** » Sun Jan 04, 2015 10:23 am

I plan on cleaning it up, The paint is really good on this one and this will be my rider.I might be gluing the dash together if I can't find one. And for the recoil handle I noticed that right away lol. Someone stored it in side for 12 years or something like that and it only has 2000 miles.

Sent from my iPhone using Tapatalk

sledhead16 · Post by **sledhead16** » Sun Jan 04, 2015 2:49 pm

tell us about the motor? Runs?

Packers29 · Post by **Packers29** » Sun Jan 04, 2015 2:55 pm

Hasnt run in several years(Crank seal will be changed lol) according to the seller but it turns over. The moment or truth is coming soon I will post a video.

Packers29 · Post by **Packers29** » Sun Jan 04, 2015 6:24 pm

N

No more ugly stickers

Sent from my iPhone using Tapatalk

Packers29 · Post by **Packers29** » Mon Jan 05, 2015 10:30 pm

Made some progress today
Seat off its the original seat cover

with one piece of wood being rotted need to replace that.

The ski is next i have a old bent ski that has the bolt in it time to swap.

Packers29 · Post by **Packers29** » Wed Jan 07, 2015 2:46 pm

Got some more parts

Sent from my iPhone using Tapatalk

Packers29 · Post by **Packers29** » Thu Jan 08, 2015 10:12 pm

Made some Progress Put the seat back on after replacing the wood. Put the exhaust back in and put the better of the Skis I had around. Still looking for a throttle Block.
Sledhead16 I have the right recoil handle in the picture

Packers29 · Post by **Packers29** » Fri Jan 09, 2015 11:19 pm

Thanks to Jdrob I now have a dash with no cracks thanks!!!

Sent from my iPhone using Tapatalk

JDT · Post by **JDT** » Sat Jan 10, 2015 10:37 am

In the first photo you have an SST on the trailer.

What are you doing with that??

Packers29 · Post by **Packers29** » Sat Jan 10, 2015 10:53 am

Not my trailer. It was the sellers.

1980 Liquifire Project

1980 Liquifire Project

Re: Got a Deere

Re: Got a Deere

Re: Got a Deere

Re: Got a Deere

Re: Got a Deere

Re: Got a Deere

Re: Got a Deere

Re: Got a Deere

Re: 1980 Liquifire Project

Re: 1980 Liquifire Project

Re: 1980 Liquifire Project

Re: 1980 Liquifire Project

Re: 1980 Liquifire Project

Re: 1980 Liquifire Project