Brittle Secondary Cam Sliders
Re: Brittle Secondary Cam Sliders
One thing to remember is that if they are not the same height the clutch will not travel to full shift as well ! Yes they will wear to the helix and sooner or later be a dead match but then they are wore out ! I have tried all the after mkt ones they work but just aren't right ,i have broke them as well .Maybe i am just to picky LOL .I found a big bag of nos ones somewhere in my travels they are the black ones . they fit perfect as well as match the helix angle. Just my opinion i might be wrong .Brock
Re: Brittle Secondary Cam Sliders
They did fit but...... The height was about 1mm shorter, it did actually fit the upper helix better than the kimpex, and also the front lip was 1mm shorter as you can see in the pic. I put the kimpex back in. I don't have any mid mount stuff anymore so, if someone has a comet 90d or an earlier salsbury secondary that needs buttons bring it to Grimsby and we'll try it out. I don't think there is an aftermarket source for the salbsbury's or 90d's other than NOS ones. They came in a pack of 6 from Deere. It would be great if we could get this confirmed for the mid mount guys. Also some feedback on the teflon ones for the later fire series would be good too.
-
- Posts: 43
- Joined: Sat Oct 20, 2012 10:26 pm
- Real Name: Jordan Klonteig
- Location: Chatham, Ontario
Re: Brittle Secondary Cam Sliders
I've meaning to tear down the sally on my 300 as I don't think I'm getting full speed out of it and I suspect the clutches. I might give this a try then to see how it compares. Right now we have snow, though... so she stay's running!
Jordan
-----------------
1-1/2 JD300E's
-----------------
-----------------
1-1/2 JD300E's
-----------------
Re: Brittle Secondary Cam Sliders
Matt wrote:Agree with Brock, those are the same as the Salsbury & early Comet.
There are two versions of the aftermarket sliders, one is Teflon. I stock both. Not sure if they're really any stronger or not.
Well hopefully the Teflon ones are less brittle, I'll get some ordered. Thanks Matt!
1980 Liquifire
1983 Trailfire LX
Others
67 Olympique
72 Elan single
72 Elan 340 TNT Swap
74 Elan Twin
78 Elan Deluxe
87 Phazer Deluxe
89 Formula MXLT
1983 Trailfire LX
Others
67 Olympique
72 Elan single
72 Elan 340 TNT Swap
74 Elan Twin
78 Elan Deluxe
87 Phazer Deluxe
89 Formula MXLT
-
- Posts: 43
- Joined: Sat Oct 20, 2012 10:26 pm
- Real Name: Jordan Klonteig
- Location: Chatham, Ontario
Re: Brittle Secondary Cam Sliders
Steven, what was the part number you ordered these from for Deere? I'm going to grab some to try on the salsbury.
Jordan
-----------------
1-1/2 JD300E's
-----------------
-----------------
1-1/2 JD300E's
-----------------
Re: Brittle Secondary Cam Sliders
AM128511 they come in a pack of 6.
-
- Posts: 43
- Joined: Sat Oct 20, 2012 10:26 pm
- Real Name: Jordan Klonteig
- Location: Chatham, Ontario
Re: Brittle Secondary Cam Sliders
Ah ok. Sorry I wasn't sure if that picture was the package for the new ones. Thanks.
Jordan
-----------------
1-1/2 JD300E's
-----------------
-----------------
1-1/2 JD300E's
-----------------
Re: Brittle Secondary Cam Sliders
so will the deere gator sliders work on a 74 midmount ? I need some for a 600 , matt do you have them in newbreed ? thx wade
certificate recipiant of the 12 vintage challenge !! on a 78 liquifre 440,
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
- 400brian
- Posts: 5621
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: Brittle Secondary Cam Sliders
The buttons for the early sleds are still available from Comet.
http://www.mfgsupply.com/204332a.html
The Gator ones do look similar.
http://www.mfgsupply.com/204332a.html
The Gator ones do look similar.
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Brittle Secondary Cam Sliders
Yes I do Wade: http://www.newbreedparts.com/newbreed/i ... uct_id=355lwb140 wrote:so will the deere gator sliders work on a 74 midmount ? I need some for a 600 , matt do you have them in newbreed ? thx wade
Matt - JDsleds.com Administrator