Interest in JDM-81 Clutch Align Tool build?
-
- Posts: 289
- Joined: Thu Nov 01, 2007 12:00 am
- Real Name: Keith Bylin
- Location: NE North Dakota
Interest in JDM-81 Clutch Align Tool build?
I am wondering out loud about the interest out there of having the JDM-81 Clutch Alignment Tool made. It would machined within the tolerances of the day and of the same material. (See Deere SM-2108 50-20-2). Price range would be a GUESS at this point but would $100 to $200 each, cause you to take interest and have one on the shop wall? I do not have the time or money to have 20 made and sell them as folks have a need. So at this stage leave a post for all to see (no PM's) and find out what kind of numbers we would be looking at. With that, I will be able to get a better estimate of the cost per tool. I have 3 spoken for at this writing.
keith
keith
-
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Interest in JDM-81 Clutch Align Tool build?
What models does this work for?
Matt - JDsleds.com Administrator
-
- Posts: 2965
- Joined: Thu Jul 14, 2005 12:00 am
- Real Name: Pat Scott
- Location: Southeast Pa.
Re: Interest in JDM-81 Clutch Align Tool build?
76/77/78 cyclone/ liquifire, 76 liquidator
'76 440 cyclone
'76 440 liquifire
'78 440 Cyclone
'75 JDX8 (sold to a member here)
'78 Liquifire(CrossCountry Clone)
'80 Liquifire(sold)
'76 440 liquifire
'78 440 Cyclone
'75 JDX8 (sold to a member here)
'78 Liquifire(CrossCountry Clone)
'80 Liquifire(sold)
Re: Interest in JDM-81 Clutch Align Tool build?
I'm interested in one.
Re: Interest in JDM-81 Clutch Align Tool build?
sure ill take one
certificate recipiant of the 12 vintage challenge !! on a 78 liquifre 440,
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
- VintageCatMan
- Posts: 92
- Joined: Mon Sep 10, 2007 12:00 am
- Real Name: Nick Freatman
- Location: Lockport, NY
-
- Posts: 573
- Joined: Mon Nov 12, 2007 1:00 am
- Real Name: Ed Jones
- Location: northwest ohio
Re: Interest in JDM-81 Clutch Align Tool build?
I could use one. I could also use one for LF/SF/TF and maybe Spitfire.
Nothing Runs Like A Deere
- JDXspec
- Posts: 896
- Joined: Thu Jul 21, 2005 12:00 am
- Real Name: Dustin
- Location: SW Minnesota
- Contact:
Re: Interest in JDM-81 Clutch Align Tool build?
This tool works for all Trailfire, Sportfire and Liquifire sleds equipped with the 102c comet. (not sure about the tr800) The Spitfire and Sprintfire use another alignment tool similar but is over built for some reason?
Own 74 295/s, 75 340/S, 800, 76 440 Liquifire, 300, Liquidator (3), 78 440 Liquifire, 340 Liquifire CC, 80 Liquifire, 82 Trailfire LX, 83 Sprintfire 84 Sportfire
- SnowCrossMark
- Posts: 48
- Joined: Thu Nov 03, 2011 9:14 pm
- Real Name: Mark
- Location: Niagara Falls Ontario
- Contact:
Re: Interest in JDM-81 Clutch Align Tool build?
Wonderful, amazing, unbelievable, yes make one for me, yes definitely eh.
-Mark-
-Mark-
1977 340 Liquifire, 2 - 1978 440 Liquifires, 78 cc Clone(#35),
1997 Polaris XCR SE 600 (mistake).....
#400v
I seemed to have been a much better driver when my sled was slower.
1997 Polaris XCR SE 600 (mistake).....
#400v
I seemed to have been a much better driver when my sled was slower.
-
- Posts: 1
- Joined: Sat Mar 14, 2015 9:51 am
- Real Name: Rick Pynaker
- Location: Wisconsin
Re: Interest in JDM-81 Clutch Align Tool build?
I would take one if price was right
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: Interest in JDM-81 Clutch Align Tool build?
I will make it a point to take mine to the shop Tuesday and see if it can be reproduced cost effectively. What do you guys think you should pay?
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
- Posts: 289
- Joined: Thu Nov 01, 2007 12:00 am
- Real Name: Keith Bylin
- Location: NE North Dakota
Re: Interest in JDM-81 Clutch Align Tool build?
Hello DA,
The guys I have talked to were "OK" in the $100 to $175 range. Heck, a new belt is 50+! Reading over these posts the build numbers would be about 10??
keith
The guys I have talked to were "OK" in the $100 to $175 range. Heck, a new belt is 50+! Reading over these posts the build numbers would be about 10??
keith
-
- Posts: 1450
- Joined: Sat Jan 30, 2010 10:54 am
- Real Name: Pat
- Location: N. IL
Re: Interest in JDM-81 Clutch Align Tool build?
I'll take one, which means this build number can go to eleven....
- jdrob
- Posts: 1212
- Joined: Thu Feb 25, 2010 1:23 pm
- Real Name: Rob
- Location: Pennsylvania/OHIO border
Re: Interest in JDM-81 Clutch Align Tool build?
I had mine built for free. works like a charm...
Sent from my SM-N900V using Tapatalk
Sent from my SM-N900V using Tapatalk
Jdrob
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: Interest in JDM-81 Clutch Align Tool build?
My friend that owns the shop is out of the country and his employee is really swamped right now. I showed him the tool and he feels like we need to wait until Steve gets home. Unfortunately I'm leaving in a week and will be gone for two weeks. I'll get in touch with Steve on my return and see what he thinks about the project.
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.