Interest in JDM-81 Clutch Align Tool build?
- Horicon Joe
- Posts: 1091
- Joined: Mon Jul 18, 2005 12:00 am
- Real Name: Joe Wanie
- Location: ROLLING PRAIRIE WI
Re: Interest in JDM-81 Clutch Align Tool build?
I will have a cost after they are made. I have had the ball on this for a short time. I will let you guys now as soon as possible.
The cost will be driven from actual numbers and no estimates. I just don't want to give a price and have some unknown detail missed.
Thanks
Joe
The cost will be driven from actual numbers and no estimates. I just don't want to give a price and have some unknown detail missed.
Thanks
Joe
Please add your Real Name in your User Profile or at least your first Name!
-
- Posts: 152
- Joined: Tue Jan 01, 2013 11:37 pm
- Real Name: Chris Farrell
- Location: greenville,mi
Re: Interest in JDM-81 Clutch Align Tool build?
I am defiantly interested in buying one these.
79 spitfire. 78 cyclone 440
76 liqufire 340. 80 liquifire
76 liquifire 440 x 2
76 liqufire 340. 80 liquifire
76 liquifire 440 x 2
Re: Interest in JDM-81 Clutch Align Tool build?
I am in for one as well!
- Horicon Joe
- Posts: 1091
- Joined: Mon Jul 18, 2005 12:00 am
- Real Name: Joe Wanie
- Location: ROLLING PRAIRIE WI
Re: Interest in JDM-81 Clutch Align Tool build?
Here it is .......... Matt will be selling them. $130
Joe
Joe
Please add your Real Name in your User Profile or at least your first Name!
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: Interest in JDM-81 Clutch Align Tool build?
Great job Joe Wanie!!!
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
- Posts: 289
- Joined: Thu Nov 01, 2007 12:00 am
- Real Name: Keith Bylin
- Location: NE North Dakota
Re: Interest in JDM-81 Clutch Align Tool build?
They look GREAT Joe! Thanks so much for taking on this project! I have needed one for some time as it seems no matter how much time I spend moving the engine around, when I tighten it up, it MOVES again. This tool solves that issue and some $50.00 belts too. I will take three like I committed to! See it is priced LOWER than the $150 estimate/guessed at when I did the first post.
For thirteen of you who also asked for this tool, please place your order with Matt soon. Joe (and Matt too) have their own money in this project. So lets please get payment to them ASAP and maybe, just maybe, they will do another project for us!
keith bylin
For thirteen of you who also asked for this tool, please place your order with Matt soon. Joe (and Matt too) have their own money in this project. So lets please get payment to them ASAP and maybe, just maybe, they will do another project for us!
keith bylin
-
- Posts: 360
- Joined: Sun Feb 25, 2007 1:00 am
Re: Interest in JDM-81 Clutch Align Tool build?
I would like to say something on this subject but cannot find the right words....Horicon Joe...could you help me...confused ex snowmobiler....
-
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Interest in JDM-81 Clutch Align Tool build?
They're listed in the store now (for pre-order until I receive them):
http://www.newbreedparts.com/newbreed/i ... uct_id=384
http://www.newbreedparts.com/newbreed/i ... uct_id=384
Matt - JDsleds.com Administrator
-
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Interest in JDM-81 Clutch Align Tool build?
Clutch alignment tools are in, and the pre-orders are shipping today.
Matt - JDsleds.com Administrator
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: Interest in JDM-81 Clutch Align Tool build?
I did confirm on a current build that this tool will not work for a TR-800 clutch.
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
- nick80lf
- Posts: 1152
- Joined: Thu Jan 14, 2010 10:45 pm
- Real Name: Nick
- Location: The snow free zone of Ohio
Re: Interest in JDM-81 Clutch Align Tool build?
Do these work for the Snowfire / Sprintfire sleds?
Sent from my HTC One_M8 using Tapatalk
Sent from my HTC One_M8 using Tapatalk
80 Liquifire (purchased 1996 ~ Running)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
-
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Interest in JDM-81 Clutch Align Tool build?
JDXSpec posted earlier in this thread that the Sprint/Snow used a different tool.
The pre-orders will go out Monday as my post office wasn't open Friday.
The pre-orders will go out Monday as my post office wasn't open Friday.
- Danzig
- Posts: 4431
- Joined: Wed Aug 17, 2005 12:00 am
- Real Name: Paul File
- Location: Van Orin, Illinois
Re: Interest in JDM-81 Clutch Align Tool build?
I am scratching my head on this, how do you make a tool like this work for your benefit ?
The engine mounts are not slotted on a1980 + liquifire, where do you adjust ? I guess after building several of these machines I am still learning ?
I can see using the 3/8 square stock for setting the secondary shims between the sheeves.
Open for schooling.....
The engine mounts are not slotted on a1980 + liquifire, where do you adjust ? I guess after building several of these machines I am still learning ?
I can see using the 3/8 square stock for setting the secondary shims between the sheeves.
Open for schooling.....
1973 JDX8
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440
"Gotta Lick It Before You Stick It"
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440
"Gotta Lick It Before You Stick It"
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: Interest in JDM-81 Clutch Align Tool build?
Paul the useful purpose of the tool for Fire series with 102s is the amount of shimming you do on the primary. There's a good writeup about it in the Fine Tune Manual. As to adjusting fore/aft you don't. It needs to be 11.88" for the Liquifire and I think 11.50 for Sport/Trail ( but could be wrong about that).
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
- Danzig
- Posts: 4431
- Joined: Wed Aug 17, 2005 12:00 am
- Real Name: Paul File
- Location: Van Orin, Illinois
Re: Interest in JDM-81 Clutch Align Tool build?
Hmmm....well, looks like a good tool for a trailfire or sportfire. I just read the manual and it states to use a 3/8 square stock to use to adjust secondary alignment like I use when shimming. Nothing I can find states using the JDM-81 on a liquifire unless my manual is missing updated info ??
1973 JDX8
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440
"Gotta Lick It Before You Stick It"
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440
"Gotta Lick It Before You Stick It"