Maybe Matt can get the bushing through Automatic Distributors. The genuine Comet front cover bushing is on page 682 of the 2017 snow catalog. Comet # 211286.
Sent from my HTC One A9 using Tapatalk
Comet Clutch talk
-
nick80lf
- Posts: 1152
- Joined: Thu Jan 14, 2010 10:45 pm
- Real Name: Nick
- Location: The snow free zone of Ohio
Re: Comet Clutch talk
80 Liquifire (purchased 1996 ~ Running)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
-
Matt
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Comet Clutch talk
I'm a direct CPC/Comet dealer and I have a contact who got the TR800 bushings put back into production. I'm sure they could do these too if there is demand.
Matt - JDsleds.com Administrator-
Matt
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Comet Clutch talk
That one is available right now if it's the right P/N, it says in the description:nick80lf wrote:Maybe Matt can get the bushing through Automatic Distributors. The genuine Comet front cover bushing is on page 682 of the 2017 snow catalog. Comet # 211286.
Sent from my HTC One A9 using Tapatalk
COVER PLATE BUSHING. Cover plate bushing for latest Comet clutches. Can be used only in cover plates with black snap ring (spirelox) visible from the outside.
Matt - JDsleds.com Administrator-
400brian
- Posts: 5620
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: Comet Clutch talk
It also says those bushings do not fit the staked-in covers. But, you have to wonder if that is true.
Matt, could you get the dimensions of THAT bushing ( 211286 ) from CPC, so we can see how it compares?
Matt, could you get the dimensions of THAT bushing ( 211286 ) from CPC, so we can see how it compares?
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
Matt
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Comet Clutch talk
Brian, I just sent an e-mail to my contact asking about the correct part numbers and availability for our version of the 102C, I'm sure he can point us in the right direction.
Matt - JDsleds.com Administrator-
usafrpilot
- Posts: 49
- Joined: Fri Sep 11, 2015 5:34 pm
- Real Name: David
- Location: Grand Prairie, TX by way of Esko, MN
Re: Comet Clutch talk
I am definitely in for this.
How can I help?
~ David
How can I help?
~ David
'74 295/S
'75 JD 800
'75 JDX8
'75 340/S
'76 Liquidator
'78 Cyclone
‘80-84 Liquifires
'75 JD 800
'75 JDX8
'75 340/S
'76 Liquidator
'78 Cyclone
‘80-84 Liquifires
-
Matt
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Comet Clutch talk
Here is the info from CPC:
The cover plate bushing for these old style 102C is actually PN 211286A and the kit comes with the bushing, 2 retaining rings, and a small bag of Loctite. The bushing is set to accept a 1-1/8” diameter post and has an OD of 1-3/8”
We would have the movable face bushing as well, which would be PN 213265A. This bearing would slide over a post with a diameter roughly 1.637” which would be the diameter of the post nearest the fixed face. The OD of the bushing would fit into a pocket roughly 1.880” wide.
I can order these directly from them if anyone needs them now.
The cover plate bushing for these old style 102C is actually PN 211286A and the kit comes with the bushing, 2 retaining rings, and a small bag of Loctite. The bushing is set to accept a 1-1/8” diameter post and has an OD of 1-3/8”
We would have the movable face bushing as well, which would be PN 213265A. This bearing would slide over a post with a diameter roughly 1.637” which would be the diameter of the post nearest the fixed face. The OD of the bushing would fit into a pocket roughly 1.880” wide.
I can order these directly from them if anyone needs them now.
Matt - JDsleds.com Administrator
Re: Comet Clutch talk
Matt, I got a question with the bushings for these "staked" cover plates. How would the two retaining rings work in these covers? Is there supposed to be a groove they lock into? Or are they supposed to sit between the bushing and the 4 detents that were punched? If that's the case, I don't think there is enough room to fit two retaining rings, or a place to lock-in. Might be missing something.
1975 John Deere 800
1975 JDX8 (VC Finisher 2019)
1976 440 Cyclone (VC Finisher 2022)
1974 El Tigre 440 (Sold)
1996 Arcitc Cat 440Z
1975 JDX8 (VC Finisher 2019)
1976 440 Cyclone (VC Finisher 2022)
1974 El Tigre 440 (Sold)
1996 Arcitc Cat 440Z
-
Matt
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Comet Clutch talk
I have no idea, but I ordered a couple of the bushings so I'll try it.
Matt - JDsleds.com Administrator-
400brian
- Posts: 5620
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: Comet Clutch talk
At this point I am pretty sure you are going to toss the rings, and just Locktite and stake the bushing in. They made a cover at one time that apparently used the rings. I was going to order a bushing and try it Matt, but if you are willing to test it, party on! 
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
Re: Comet Clutch talk
I agree, probably ditch the rings. If they made the newer covers with the rings I could see it being a better design. I know the bushing didn't move originally being staked in, but since I removed the original, not quite sure how "locked-in" the new one is until it's driving a sled. We'll see.
JP
JP
1975 John Deere 800
1975 JDX8 (VC Finisher 2019)
1976 440 Cyclone (VC Finisher 2022)
1974 El Tigre 440 (Sold)
1996 Arcitc Cat 440Z
1975 JDX8 (VC Finisher 2019)
1976 440 Cyclone (VC Finisher 2022)
1974 El Tigre 440 (Sold)
1996 Arcitc Cat 440Z
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: Comet Clutch talk
I think you could use Loc-Tite " Green, Sleeve retainer " Making sure everything is real clean & let set for 24 Hrs. to cure...
Grumpy
Grumpy
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
-
Matt
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Comet Clutch talk
I got the bushings today and this was the documentation with it if this helps at all. I'll have to pull the 102c off the 800 before I can test fit.
http://jdsleds.com/tech/comet/CometClutchRebuild.pdf
http://jdsleds.com/tech/comet/CometClutchRebuild.pdf
Matt - JDsleds.com Administrator-
harleysportster
- Posts: 2965
- Joined: Thu Jul 14, 2005 12:00 am
- Real Name: Pat Scott
- Location: Southeast Pa.
Re: Comet Clutch talk
Matt, did you get the bushing for movable sheave or the top cover? The directions are for the movable sheave. The beginning of the post is about the staked bushing of the top cover.
Confused?
Confused?
'76 440 cyclone
'76 440 liquifire
'78 440 Cyclone
'75 JDX8 (sold to a member here)
'78 Liquifire(CrossCountry Clone)
'80 Liquifire(sold)
'76 440 liquifire
'78 440 Cyclone
'75 JDX8 (sold to a member here)
'78 Liquifire(CrossCountry Clone)
'80 Liquifire(sold)
-
Matt
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: Comet Clutch talk
I was confused too. I got the the cover bushing.
Sent from my HTC6535LVW using Tapatalk
Sent from my HTC6535LVW using Tapatalk
Matt - JDsleds.com Administrator