Cyclone oval racer

This is where you can post the story & photos of your John Deere Snowmobile project.
Post Reply
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Cyclone oval racer

Post by liquidator76 »

Wanted to share a couple pictures of a cyclone I've been building from a liquifire chassis to run on the snow ovals
Attachments
20211231_151614.jpg
20220101_202253.jpg
20220101_202324.jpg
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Re: Cyclone oval racer

Post by liquidator76 »

Made some more progress today got the steering all in jackshaft and drive axle in
Attachments
20220102_163725.jpg
20220102_163515.jpg
20220102_163507.jpg
20220102_155630.jpg
20220101_202334.jpg
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Re: Cyclone oval racer

Post by liquidator76 »

the track i am using is out of a 94 jag 15x121x2.52, i had to remove the center idler and move the drivers inward, its been a pretty straight forward swap,ended up bolting in later 80's indy 6' travle rear skid, other then making four 1/8" cross shaft" spacers i didnt have to redrill any mounting holes , but i did build some front arm adjusters that allow me to move the front of the skid 3' up from the stock front hole location
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Re: Cyclone oval racer

Post by liquidator76 »

Here's a few more photos
Attachments
20220105_204300.jpg
20220105_100400.jpg
20220105_204159.jpg
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Re: Cyclone oval racer

Post by liquidator76 »

Was able to get the rear idlers put together and the track tighned up, I picked up an engine sunday, but after tearing it down I found that the crank has spun out of phase from the center pin to the pto stub
Attachments
20220110_192322.jpg
20220110_191955.jpg
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Re: Cyclone oval racer

Post by liquidator76 »

Made some more progress this weekend
Attachments
20220115_210528.jpg
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Re: Cyclone oval racer

Post by liquidator76 »

.
Attachments
20220116_180658.jpg
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Re: Cyclone oval racer

Post by liquidator76 »

.
Attachments
20220116_180711.jpg
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Re: Cyclone oval racer

Post by liquidator76 »

.
User avatar
jep_800
Posts: 445
Joined: Wed Dec 31, 2014 1:33 pm
Real Name: Jason
Location: Grand Forks, ND

Re: Cyclone oval racer

Post by jep_800 »

LOVE IT! Great progress. Can’t wait to see the final outcome.

Just curious why you went with Implement Green vs. Mean Green? Maybe what you had on hand?

Jason
1975 John Deere 800
1975 JDX8 (VC Finisher 2019)
1976 440 Cyclone (VC Finisher 2022)
1974 El Tigre 440 (Sold)
1996 Arcitc Cat 440Z
liquidator76
Posts: 27
Joined: Wed Jan 13, 2016 3:08 pm
Real Name: Shannon bacon
Location: Ny

Re: Cyclone oval racer

Post by liquidator76 »

Thanks Jason, your correct on the color at work we had a couple cases of the implimemt green paint out back on stock so that's what I decided to go with lol maybe for next year I may get the chassis powdercoated, I actually prefer the implement green then the brighter mean green, but I may even go with the Elkhart metallic green is my favorite, I picked up the clutches today off an indy to recalibrate , got some stuff done under the hood and went through the carb, also picked up a cyclone seat for it biggest things I lack now is a primer, going the clutches, belt , and hooking up the teather, the snow oval race in coudersport pa is Feb 19th
User avatar
jep_800
Posts: 445
Joined: Wed Dec 31, 2014 1:33 pm
Real Name: Jason
Location: Grand Forks, ND

Re: Cyclone oval racer

Post by jep_800 »

Actually, the "bright" green you're thinking of was the 78' Cyclones. The 76' and 77' were "Mean Green", which is closer to the Elkhart Green like you mentioned. Although I don't think that's really a true color match. The only one I've found that's the truest to original Mean Green is from VintagePaint.com. Sells it as a single stage. Is what I sprayed on my 76'.

Jason
Attachments
IMG_1918.JPG
1975 John Deere 800
1975 JDX8 (VC Finisher 2019)
1976 440 Cyclone (VC Finisher 2022)
1974 El Tigre 440 (Sold)
1996 Arcitc Cat 440Z
Post Reply