Trailfire 340 cylinder on spitfire.....

swedefire · Post by **swedefire** » Fri Nov 18, 2005 4:15 am

Both kawi 340....

Other than cutting some cooling fins what would be required, if possible?

Is the bolt pattern the same, etc..?

Thanks!

/Magnus

JoeRainville · Post by **JoeRainville** » Mon Nov 21, 2005 8:39 pm

Hey Magnus!

Glad to here from Sweden. The 340 Trailfire has the same interfaces as the Kawi powered Spitfires. So, aside from a slight triming of the cooling fins, everything else will bolt up, including the intake and exhaust manifolds.

Good luck!
-Joe Rainville
"Tech-Ed"

swedefire · Post by **swedefire** » Tue Nov 22, 2005 3:10 am

Thanks a bunch Joe!

Ill let you all know how it went...

Thanks!
/Magnus

Deleted User · Post by **Deleted User** » Tue Nov 29, 2005 1:53 am

I have to ask, if TF 340jugs will fit on a spitfire crankcase, then since TF 440 jugs will fit on a 340 case then would 440 jugs work on a spitfire case with some trimming as well?

swedefire · Post by **swedefire** » Tue Nov 29, 2005 3:28 am

Yes, probably by cutting the case but the problem will be to transfer the increased heat that a 440 will create....being only freeair....

The heads wont work either.....

/Magnus