Also, what kind of clutch is this?
I have a JDX 5 with a comet 100C on it, are parts still available for that clutch? Or this one for that matter.
Thanks for the help guys.
KennyH
Clutch Questions
Clutch Questions
I cant get the clutch bolt out of this clutch. It came out of the crank ok but I cant get it out of the nut thats behind it. Am I being to careful? does it slide right through that? Is the nut threaded to where I have to screw the bolt through that also?
Also, what kind of clutch is this?
I have a JDX 5 with a comet 100C on it, are parts still available for that clutch? Or this one for that matter.
Thanks for the help guys.
KennyH
Also, what kind of clutch is this?
I have a JDX 5 with a comet 100C on it, are parts still available for that clutch? Or this one for that matter.
Thanks for the help guys.
KennyH
Clutch Questions
Nobody huh?
I didn't mention that the motor came out of a 72 JD 500. It is a CCW 440.
The other clutch (comet) is on a whole different motor and I am wondering if that one will fit this motor and would work better.
Later,
KennyH
I didn't mention that the motor came out of a 72 JD 500. It is a CCW 440.
The other clutch (comet) is on a whole different motor and I am wondering if that one will fit this motor and would work better.
Later,
KennyH
-
Danzig
- Posts: 4431
- Joined: Wed Aug 17, 2005 12:00 am
- Real Name: Paul File
- Location: Van Orin, Illinois
Clutch Questions
You may have stunned people about the JDX5........
:o No such thing.
:o No such thing.
1973 JDX8
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440
"Gotta Lick It Before You Stick It"
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440
"Gotta Lick It Before You Stick It"
-
Matt
- Posts: 4750
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Clutch Questions
I'm curious what the clutch is, I don't have a clue.
Matt - JDsleds.com Administrator-
JoeRainville
- Posts: 4358
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Clutch Questions
Since the 72 500 came with a Salsbury drive, that one in the pic is deffinately not stock. Maybe it's a St. Lawerance or something.
If you have a 75 JDX 4, 6 or 8 with a Comet 100-C parts are still somewhat available for it from Comet or NOS.
Good Luck, and see if you can provide more info on what clutch you have there.
-Joe Rainville
"Tech-Ed"
If you have a 75 JDX 4, 6 or 8 with a Comet 100-C parts are still somewhat available for it from Comet or NOS.
Good Luck, and see if you can provide more info on what clutch you have there.
-Joe Rainville
"Tech-Ed"
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
Clutch Questions
Yup, My BAD, again!!! JDX6
Posted this question on another site and was told it is a Scorpion clutch. Got it off with a little direction!!! Thanks guys.
KennyH
p.s. I'll try to keep my numbers straight next time!!!
Posted this question on another site and was told it is a Scorpion clutch. Got it off with a little direction!!! Thanks guys.
KennyH
p.s. I'll try to keep my numbers straight next time!!!
-
blitzblack
- Posts: 34
- Joined: Wed Mar 08, 2006 1:00 am
- Location: Tustin Mi
Clutch Questions
This is a clutch from a JLO Rockwell,The only way that I have been able to get them off is to unbolt the outer part of the clutch then take a bolt that fits into the hole then find a bolt that threads into the inner part of the clutch and tighten it.The clutch "should" pop off