Align driven sheave

swedetrail · Post by **swedetrail** » Wed Jan 07, 2009 4:01 pm

Hi i am trying to find the correct driven sheave offset on a Trailfire 440 (102C) 1981 the manual only describe how to use the JD clutch tool. On the Liquifire it should be between 1,26-1,30 inches is it the same on Trailfire.

I have search and couldn?t find anything here.

/C

mwking · Post by **mwking** » Wed Jan 07, 2009 9:51 pm

From the '79-'83 Fine Tune Manual the Liquifire with a 102C clutch should have the clutch aligned with a center distance of 11.88" plus or minus .030". Horizontal positive skew should be .020 to .080". Maximum vertical skew is .040" and the offset should be 1.28" plus or minus .020".

Murray

swedetrail · Post by **swedetrail** » Thu Jan 08, 2009 3:50 am

Thank you, have to find me one of those fine tune manuals.

/Conny

webman · Post by **webman** » Thu Jan 08, 2009 1:03 pm

A real book is best, but here is a a copy of it here:
http://www.vintagesnow.com/John_Deere.html

swedetrail · Post by **swedetrail** » Thu Jan 08, 2009 1:18 pm

Nice it?s in the printer, perfect for the shop if it?s destroyed print a new one