kohler k2952ax

JoeRainville · Post by **JoeRainville** » Wed Apr 15, 2009 9:01 pm

Hey Pete,

I really thought the $130 was for a new one. Pretty high for a used one I think. Even though mine only fit Spits, 300's and JDX-4's, I will probably hang on to them. For me its more about having parts for my sleds than it is about selling them for top dollar anyway. Funny that a lawn mower part is about the same thing though!

73JDX4,

My kit is entirely made from steel: both disks and the starter cup included. I have no idea how interchangable they are, as I am not a Kolher motor expert. Maybe one of the Merc or Rupp guys could help you out?

-Joe Rainville

Liquifire 4/6 · Post by **Liquifire 4/6** » Wed Apr 15, 2009 10:57 pm

JoeRainville wrote:Hey Pete,

I really thought the $130 was for a new one. Pretty high for a used one I think. Even though mine only fit Spits, 300's and JDX-4's, I will probably hang on to them. For me its more about having parts for my sleds than it is about selling them for top dollar anyway. Funny that a lawn mower part is about the same thing though!

Yeah, I thought it odd too. Does anyone wanna take a peek at ebay item # 270350858258 to see if it looks the same as the Kohler recoil pulley? Evidently, the diameter is somewhere around 5 3/8". I don't have a new or used Kohler pulley to compare that to, but I have a used starter housing and it seems that the pulley should fit. If it's the same, I guess we could post it in the cross reference section.

Liquifire 4/6 · Post by **Liquifire 4/6** » Wed Apr 15, 2009 11:00 pm

JoeRainville wrote: 73JDX4,

My kit is entirely made from steel: both disks and the starter cup included. I have no idea how interchangable they are, as I am not a Kolher motor expert. Maybe one of the Merc or Rupp guys could help you out?

-Joe Rainville

73JDX4

I was hoping that Joe's part would work for you as it's always sweet to install an NOS part. But if it doesn't, how about posting a pic of your old one? Chances are pretty good that I'll have a good used one that I'd sell for cheap.......I just want to know what I'm looking for.

73jdx4 · Post by **73jdx4** » Thu Apr 16, 2009 12:13 am

Rainville, I will do that,Thanks again.Scott

73jdx4 · Post by **73jdx4** » Thu Apr 16, 2009 12:30 am

Liquifire,Sorry about that,thought that was from Rainville.Thanks Scott

73jdx4 · Post by **73jdx4** » Thu Apr 16, 2009 10:39 am

Rainville,I just looked up that part # on John Deere's parts catalog on the net and i think they might work.Ill give a photo of my part with measurements when my boy gets back,I do not know how to do this yet.THANKS AGAIN GUYS.73JDX4

Liquifire 4/6 · Post by **Liquifire 4/6** » Thu Apr 16, 2009 1:40 pm

I just looked at a JD 300 engine I have sitting in my shed. All the rewind stuff is missing from it, but from what I can tell. it looks like Joe's set up should bolt on fine.

73jdx4 · Post by **73jdx4** » Thu Apr 16, 2009 8:19 pm

That's what i think to Liquifire.Thanks for looking,by the way i'm looking for a belt guard maybe you might have one of them.Its the one that covers the secondary clutch its a pretty big one.73JDX4

73jdx4 · Post by **73jdx4** » Thu Apr 16, 2009 8:34 pm

Rainville,My son doesn't know how to do pictures either.So ill give you measurements,"The base is 1 3/4 wide","1 3/8 from top to bottom" "the bolt holes are 1 1/4 center to center" "the inner hole that the shoe assembly bits into is outside to outside is 2" the inside is 2 3/16 about because the ribs are gone"Thanks 73JDX4

Liquifire 4/6 · Post by **Liquifire 4/6** » Fri Apr 17, 2009 4:06 pm

73jdx4 wrote:That's what i think to Liquifire.Thanks for looking,by the way i'm looking for a belt guard maybe you might have one of them.Its the one that covers the secondary clutch its a pretty big one.73JDX4

Not sure if I know what you mean. Does it look like this?

Attachments:

Picture_413.jpg (133.06 KB)

73jdx4 · Post by **73jdx4** » Fri Apr 17, 2009 4:48 pm

Liquifire,No its the front one

JoeRainville · Post by **JoeRainville** » Fri Apr 17, 2009 4:58 pm

73JDX4,

If you want one of the kits, I will send for $20.00 plus a few bucks to ship. Drop a line with your mailing address to: joerainville@hotmail.com if you are interested.

Thanks, and good luck with your sled,
-Joe

Liquifire 4/6 · Post by **Liquifire 4/6** » Fri Apr 17, 2009 5:13 pm

I found this one on a JDX4....not sure what model year it was. If it looks like it'll do the trick, you can have it for five bucks plus shipping. I'm not certain what state you are in? Shipping this item from my location in Canada to the USA would cost anywhere from about $15.50- $18.75 depending on where you are. Perhaps you might be able to find one closer to home and save on shipping costs.

Attachments:

Picture_417.jpg (56.71 KB)

Post by **Matt** » Fri Apr 17, 2009 6:46 pm

73jdx4 wrote:Liquifire,No its the front one

You're talking about the plastic secondary cover.

73jdx4 · Post by **73jdx4** » Fri Apr 17, 2009 11:45 pm

JDmatt,Yes its the secondary clutch but i do not know if its metal or plastic it never had one i do have a part # its m63913.Thanks for any help 73JDX