Piston markings

tipitup · Post by **tipitup** » Wed Oct 05, 2005 12:52 pm

I took the pistons out of a 80 sportfire and am having questions as to whether they got back in the right way. there is an arrow and an E on the top of them. I have the arrow pointing to the E which is toward the exhaust. Let me know if that is correct.

thanks

Horicon Joe · Post by **Horicon Joe** » Wed Oct 05, 2005 2:05 pm

Sounds good to me ..........

Joe

tipitup · Post by **tipitup** » Wed Oct 05, 2005 3:27 pm

thanks, you wouldn't happen to have a picture on the timing marks for the sportfire. I having trouble with it starting and it was suggested that the timing is off.

Horicon Joe · Post by **Horicon Joe** » Thu Oct 06, 2005 9:14 am

Sportfire ......... here you go .......

Joe

tipitup · Post by **tipitup** » Mon Oct 10, 2005 2:29 pm

joe,

can you use a liquifire CDI in place of the Sporty's? I have acces to one, just wondering.

craig

Horicon Joe · Post by **Horicon Joe** » Mon Oct 10, 2005 2:39 pm

My thought is no...........

It seems someone was just asking about this ...... check the posts

Joe

JDFanPa · Post by **JDFanPa** » Mon Oct 10, 2005 4:35 pm

the lf cdi should work fine I used a trailfire cdi on a kawi invader which has a similar motor as a lf just make sure theres 2 wires white and a red that will plug into the stator a 3 wire connector for the coil and should have a black and a brown wire that go into the engine connector the brown will have a pigtail wire that gets grounded to the case