340S hood opening up the "gills"
-
400brian
- Posts: 5894
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
340S hood opening up the "gills"
If you are bored, a repro 340S hood is what you need. Working on opening up the gills, if I remember correctly, Gunga Don chickened out of this. The initial windshield trial fit looks to be an adventure as well!
- Attachments
-
- 340S repro hood gills 001.JPG (150.57 KiB) Viewed 1136 times
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: 340S hood opening up the "gills"
Wow Brian you need a new gas cap on that NEW Hood.
Kenny
Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
-
400brian
- Posts: 5894
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: 340S hood opening up the "gills"
You got a pile of them Kenny?
I do have a shiny new, but plain black one.
I do have a shiny new, but plain black one.
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: 340S hood opening up the "gills"
I could only wish, I don't think I even have one new one??
Kenny
Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
-
400brian
- Posts: 5894
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: 340S hood opening up the "gills"
The gills on the opposite side of the hood are going to be tougher, need a lefty with a good shoulder.
So, I decided to take a break, and install the Cannon Classic Sleds windshield. I marked where the tabs hit the hood, then started drilling a lot of 1/8" holes. The glass is thin enough that I could just push the bit sideways to elongate the holes into a slot. Then I wrapped a bit of sandpaper around a hacksaw blade, and smoothed things up. It took some trial and error, but I finally got things to fit like I wanted.
I then marked the six holes around the headlight, and drilled the hood for the Wellnuts. Should work
I had an original used windshield that came with the sleds. It looks just like the repro one. I was going to use it for the template, but I found it wouldn't fit the original glass hood I have! I stuck the tabs in the slots OK, but then it bulged out all around the headlight pod so much that you'd have had a *itch of a time screwing it down. Something would have broke.
I think I understand the issues Troy had with his, ( last fall ) a whole lot better now.
Left side gills to go, and the holes for the hood pin plates.
So, I decided to take a break, and install the Cannon Classic Sleds windshield. I marked where the tabs hit the hood, then started drilling a lot of 1/8" holes. The glass is thin enough that I could just push the bit sideways to elongate the holes into a slot. Then I wrapped a bit of sandpaper around a hacksaw blade, and smoothed things up. It took some trial and error, but I finally got things to fit like I wanted.
I then marked the six holes around the headlight, and drilled the hood for the Wellnuts. Should work
I had an original used windshield that came with the sleds. It looks just like the repro one. I was going to use it for the template, but I found it wouldn't fit the original glass hood I have! I stuck the tabs in the slots OK, but then it bulged out all around the headlight pod so much that you'd have had a *itch of a time screwing it down. Something would have broke.
I think I understand the issues Troy had with his, ( last fall ) a whole lot better now.
Left side gills to go, and the holes for the hood pin plates.
- Attachments
-
- 340S repro hood windshield fitting 001.JPG (118.83 KiB) Viewed 1101 times
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: 340S hood opening up the "gills"
Ditto on same issues. Installing the windsheld was tough. I thought sure it would break trying to make it fit. DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
HoosierDeereMan
- Posts: 1089
- Joined: Thu Feb 01, 2007 1:00 am
- Real Name: Troy Miley
- Location: Oakland City, IN
Re: 340S hood opening up the "gills"
Brian,
Your handy work on the vents looks excellent!
Not to burst your bubble on the windshield but mine fit decent without the gasket too. Once the gasket is installed and you are trying to get those metal retaining clips over the windshield tabs and align the holes for the wellnuts it changes the angle on everything! Just make sure you are in the mood for a huge challenge when you do this. It's loads of fun! Good Luck!
Troy
Your handy work on the vents looks excellent!
Not to burst your bubble on the windshield but mine fit decent without the gasket too. Once the gasket is installed and you are trying to get those metal retaining clips over the windshield tabs and align the holes for the wellnuts it changes the angle on everything! Just make sure you are in the mood for a huge challenge when you do this. It's loads of fun! Good Luck!
Troy
'72 400
'73 400, (2)500's, 600
'74 295/S (restored) 2010 HOF poker run survivor.
'75 800, JDX8,
'75 340/S 2011 & 2012 Vintage Challenge finisher.
'76 (2)400's
'78 Liquifire 340,440
'79 Spitfire
"If it has Tits, Tires, or Tracks it's gonna cost you money!"
'73 400, (2)500's, 600
'74 295/S (restored) 2010 HOF poker run survivor.
'75 800, JDX8,
'75 340/S 2011 & 2012 Vintage Challenge finisher.
'76 (2)400's
'78 Liquifire 340,440
'79 Spitfire
"If it has Tits, Tires, or Tracks it's gonna cost you money!"