Will John Deere PN: AM55209 work on the 80-84 Kawasaki powered Liquifires?
Thanks!
Liquifire recoil cup?
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: Liquifire recoil cup?
I'm not sure what a AM55209 is off of, but it's not one of the 80-84 liquifire parts, so I would have to say no it wouldn't fit..
BUT with that said, if you have both of the parts new & old set them side by side & compare them, if they are dead on identical then it will work..
What part are you calling the recoil cup? " the part that bolts to the flywheel that the recoil Engages into" ? That Deere calls a pulley in the Liquifire parts book...
Kenny
BUT with that said, if you have both of the parts new & old set them side by side & compare them, if they are dead on identical then it will work..
What part are you calling the recoil cup? " the part that bolts to the flywheel that the recoil Engages into" ? That Deere calls a pulley in the Liquifire parts book...
Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
Re: Liquifire recoil cup?
The part that the recoil engages into. I am building an Invader engine and all the recoil cups that I have are all chewed up. So I am looking for a NOS one. There are some on ebay with the part number AM55209. I was wondering if they would work. I am unable to compare, and was hoping to determine if it would work before I bought it...
Thanks
Thanks
Re: Liquifire recoil cup?
JDparts online says that number is for Sportfire only.
As the Sporty used the T-7 engine I would say it would not fit.
As the Sporty used the T-7 engine I would say it would not fit.
Todd Schrupp
Milbank SD
Milbank SD
-
johnnycyclone
- Posts: 867
- Joined: Wed Sep 12, 2007 12:00 am
- Real Name: Terre
- Location: Dundee, Mi
Re: Liquifire recoil cup?
Here is a couple of pics to show the difference. The one on the left is from a Sportfire, the one on the right is from a 1980 Invader 4/6. Everything is the same except the Sportfire has the tabs on the side. I'm assuming the tabs can be used to wrap a rope around to start the engine, if the recoil goes out, but I am not sure on that. Hope this helps.
- Attachments
-
- IMG_0458.JPG (134.91 KiB) Viewed 576 times
-
- IMG_0457.JPG (138.75 KiB) Viewed 572 times
-
johnnycyclone
- Posts: 867
- Joined: Wed Sep 12, 2007 12:00 am
- Real Name: Terre
- Location: Dundee, Mi
Re: Liquifire recoil cup?
There seems to be a difference in the Sportfire with oil injection also. I took a pic of one from an 82 Sportfire with oil injection, it is on the right. The one on the left is from a Sportfire engine with out oil injection. That should make it as clear as mud now.
Terre
Terre
- Attachments
-
- IMG_0465.JPG (78.83 KiB) Viewed 573 times
Re: Liquifire recoil cup?
Looks like the best bet would be to compair the two side by side as you have in the photo.
Todd Schrupp
Milbank SD
Milbank SD
Re: Liquifire recoil cup?
The ones on ebay have the tabs on them. I think they will fit... I am going to buy one. Thanks for the help. I will report back if they fit or not.
-
Deere Daze
- Posts: 312
- Joined: Fri Jul 22, 2005 12:00 am
- Location: ONTARIO , CANADA
- Contact:
Re: Liquifire recoil cup?
It will fit and work fine, only diff is that it has the tab for the recoil rope for the tool kit rope.