Engine rubber mounts
-
JDXspec
- Posts: 896
- Joined: Thu Jul 21, 2005 12:00 am
- Real Name: Dustin
- Location: SW Minnesota
- Contact:
Engine rubber mounts
I know there has been some talk of the eng mounts for the JDX/100 series-early Liquifire/cyclone. I think I have found a good replacement. It looks and measures up the same. I got it from my Bobcat skidloader dealer PN 6560633 about $15 a piece.
- Attachments
-
- eng mounts 004.JPG (72.3 KiB) Viewed 5474 times
-
- eng mounts 002.JPG (82.77 KiB) Viewed 5474 times
-
- eng mounts 001.JPG (81.53 KiB) Viewed 5474 times
Last edited by JDXspec on Thu Jun 02, 2011 10:17 pm, edited 2 times in total.
Own 74 295/s, 75 340/S, 800, 76 440 Liquifire, 300, Liquidator (3), 78 440 Liquifire, 340 Liquifire CC, 80 Liquifire, 82 Trailfire LX, 83 Sprintfire 84 Sportfire
-
Cabindweller
- Posts: 561
- Joined: Wed Mar 12, 2008 12:00 am
- Real Name: Jerry Zebro
- Location: Ridgeland WI
Re: Engine rubber mounts
Interesting, Thanks for the heads up
Jerry
Jerry
Old sleds are hours of entertainment.... then you get to ride them for a little bit.
Re: Engine rubber mounts
Any news on how these replacement engine mounts you have found hold up under normal wear and tear?
Adam Epp
Winnipeg, MB, Canada
74 400 (2 - sold)
75 800 (motor in pieces, next on the resto list)
75 X4 Special (bare tunnel, stripped)
76 340 Cyclone (resto in progress)
76 340 Cyclone (bare tunnel, stripped)
Winnipeg, MB, Canada
74 400 (2 - sold)
75 800 (motor in pieces, next on the resto list)
75 X4 Special (bare tunnel, stripped)
76 340 Cyclone (resto in progress)
76 340 Cyclone (bare tunnel, stripped)
-
Danzig
- Posts: 4431
- Joined: Wed Aug 17, 2005 12:00 am
- Real Name: Paul File
- Location: Van Orin, Illinois
Re: Engine rubber mounts
JDXspec wrote:I know there has been some talk of the eng mounts for the JDX/100 series-early Liquifire/cyclone. I think I have found a good replacement. It looks and measures up the same. I got it from my Bobcat skidloader dealer PN 6560633 about $15 a piece.
Excellent !!
1973 JDX8
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440
"Gotta Lick It Before You Stick It"
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440
"Gotta Lick It Before You Stick It"
-
JDXspec
- Posts: 896
- Joined: Thu Jul 21, 2005 12:00 am
- Real Name: Dustin
- Location: SW Minnesota
- Contact:
Re: Engine rubber mounts
With this last winter being not the greatest I didn't get all the miles in I wanted (about 50 miles). That said they are holding up great. If you notice the eng is NOT a JD eng, but the mounts are jd. Being I have the 650 wildcat eng in there it still is rock solid. More then normal wear and tear so they work great.
Own 74 295/s, 75 340/S, 800, 76 440 Liquifire, 300, Liquidator (3), 78 440 Liquifire, 340 Liquifire CC, 80 Liquifire, 82 Trailfire LX, 83 Sprintfire 84 Sportfire
Re: Engine rubber mounts
The fit of these is perfect, but they do run about $25 a piece here in the great white north
Adam Epp
Winnipeg, MB, Canada
74 400 (2 - sold)
75 800 (motor in pieces, next on the resto list)
75 X4 Special (bare tunnel, stripped)
76 340 Cyclone (resto in progress)
76 340 Cyclone (bare tunnel, stripped)
Winnipeg, MB, Canada
74 400 (2 - sold)
75 800 (motor in pieces, next on the resto list)
75 X4 Special (bare tunnel, stripped)
76 340 Cyclone (resto in progress)
76 340 Cyclone (bare tunnel, stripped)