I am selling a bunch of John Deere parts. I can provide pictures and more descriptions if you are truly interested in any thing listed below.
Thank you,
Craig, 920-763-4954
Horicon, WI
1-CCW recoil with Canadian maple leaf, good working shape, no break or chips in casting, Black paint chipping. $35
2-John Deere Operators Manual for JDX4, JDX6, JDX8 Snowmobiles M64455, Issue F3. Manual has some wear and marks on cover and pages, no cuts or tears. $15.00
3- JD Drive sprockets, never used NOS, 8 lug, hex center with metal insert, AM54216 possibly, $25 a pair, more than three pair $20 each pair
4- Dash/instrument panel with brush steel face plate possibly AM55348, no dents or breaks, only worn where choke and ignition was mounted, used little.
5- NOS Dashes/Instrument panel M63817 (JDX8), these have never been mounted, no wear. Great for restoration/museum sled. $35 each
6- NOS, Drive axle bearings Fafnir RA 100 R, never used they have the center piece coming out from the bearing, rear axle I believe. $20 a pair or $80 for 10 bearings.
7-Air Box with tube, AM54759, looks new not sure if it was used $20
8-Carb Jets, pin jets, and carb needles (jet's $1 each, Needles $2 each), large assortment
9-JD Secondary clutches, used but in solid condition, long time on shelf, $50 each, two sizes
10- Salsbury clutches three look new and one is used,
11- Ski Shock AM54759, used $10
John Deere parts 4 sale for several models
Forum rules
Classified Posting Guidelines:
#1: JD snowmobile and related items only.
#2: Please do not post negative opinion comments about an item or PRICE. The only replies should be legitimate questions from interested parties.
Classified Posting Guidelines:
#1: JD snowmobile and related items only.
#2: Please do not post negative opinion comments about an item or PRICE. The only replies should be legitimate questions from interested parties.
- nick80lf
- Posts: 1160
- Joined: Thu Jan 14, 2010 10:45 pm
- Real Name: Nick
- Location: The snow free zone of Ohio
Re: John Deere parts 4 sale for several models
PM sent
80 Liquifire (purchased 1996 ~ Running)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
Re: John Deere parts 4 sale for several models
Can you post a picture of the bearings please?
Are they in sealed bags?
Are they in sealed bags?
Todd Schrupp
Milbank SD
Milbank SD
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: John Deere parts 4 sale for several models
Could you post a picture of the ski shock please.
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
Re: John Deere parts 4 sale for several models
I am short of time tonight, I'll get you pics and more descriptions of the parts tomorrow night, thanks for responding guys!!!!
Re: John Deere parts 4 sale for several models
The bearings were in a bulk sleeve with lubricated paper around it like you see in the picture. I have twenty available of this popular bearing that was used in many snowmobiles and other Deere equipment and machines.
The air box is also shown here with rubber tube. I will likely ship together with tube off though. Long time on the shelf. Very good conition just shelf dust.
The shock shows some wear. But works good.
I also have a silencer box M52568 also shown, last.
The air box is also shown here with rubber tube. I will likely ship together with tube off though. Long time on the shelf. Very good conition just shelf dust.
The shock shows some wear. But works good.
I also have a silencer box M52568 also shown, last.
Re: John Deere parts 4 sale for several models
I'll take 10 of those bearings.
Send me a PM with payment details.
I can do PayPal or a check.
Thanks
Send me a PM with payment details.
I can do PayPal or a check.
Thanks
Todd Schrupp
Milbank SD
Milbank SD
Re: John Deere parts 4 sale for several models
Thanks Todd
I got it and I 'll get them out on Monday. Got a 10 hr. day at trade show Sat. to do for work this weekend in Milwaukee. I'll pack'em on Sunday. Thanks.
I got it and I 'll get them out on Monday. Got a 10 hr. day at trade show Sat. to do for work this weekend in Milwaukee. I'll pack'em on Sunday. Thanks.