Year 1975 Serial 031633M
Build Date Sep, 74
Original Currently
Name: Andrew Clark
Location Le Sueur MN
Owned since December 2019
Original Dealer Unknown

Year 1975 Serial 031898M
Build Date Aug, 74
Original Currently taken apart
Name: Andrew Clark
Location Le Sueur MN
Owned since December 2017
Original Dealer Unknown

Year 1975 Serial 031166M
Build Date Sep, 74
Original Currently
Name: Andrew Clark
Location Le Sueur MN
Owned since December 2019
Original Dealer Unknown

Good to hear you got them running again.

harleysportster wrote: I want to point out a correction needed for the previous info.
The correct cam arm for Serial NO. 70,001 and up
Both 340 and 440 Cyclone,AM54279 which is stamped "R"
All the clutching info is for Altitude of Sea Level to 2000 ft.

I fixed the post. Thanks

AJC

Here is Deere to Comet Cross Reference . When it comes to clutching there is know 1 setup. There are optimal setups but even these very based on what your doing. The stock setup is a good overall base. You can run your F weights in a new clutch. Now if you have a Cyclone between Serial NO. 55,001-70...

Dose anyone have a NOS M63118 motor mount they could measure and take a picture of? I'm working on making a mold so I could pour liquid polyurethane mounts. Liquid polyurethane for diy engine mounts is fairly cheap, like 25$ to 30$ and will be able to pour at least 4 mounts. You can also pick the du...

aluminum melts at 1,221°F, But there is probably more to it.

Any one tune with egt's? I was thinking about giving it a try and wanted some thoughts?

Jason, We made progress on the 800, put over 30 miles on it.But its seems to not be getting all the power to the ground. I think its in the secondary or belt. Also looks like the 600 is down. David wont run it with white drivers. I have more testing but cant wait.

AJC

The Kimpex windshields are better then the Sno-Stuff ones. I think Kimpex stopped making them so there getting hard to find.

They make new windshields, but they don't hold up very well and tend to fold in on them self. How bad is yours? doesn't look to bad in the pics. If you still have the clips the screws are M63450 . They look to be still available at the dealer. Otherwise they are a No.10 5/8 flat head screw that were...

Anyone know how to get the moisture out of the gauges? Its starting to bug me. Also what causes it, as one gauge has it and the other doesn't.

The Bogie Bash was fun. Other then the rpm issue with my 800 all went well. David's cyclone will need a little more looking in to back home. 400brian Summed up the day pretty well, So here are the pictures I took.

Andrew

Thanks for clearing that up. How similar is the 295/s to JDX8/800 pipe?

AJC



















/