Seems like all the aftermarket throttle cables for the 76-78 sleds are too short. Anybody know of something else that works or has some NOS ones?
Thanks

I bought a brand new Comet #212600A clutch from a friend for a very good price for my 78 Cyclone 440. I installed a new silver spring (from new breed) and NOS R weights AM54279. The NOS R weights were hitting the inside of the spider so had to grind out some material on the insides of the spider whe...

Forgot to add that Im located near Blaine MN, phone is 612-328-6230

I have some Mid Mount parts to get rid of. Poly gas tanks, very good track (rubber), some plastic shroud stuff, exhaust, boggie wheels and shafts and 400/22 parts. If anybody wants them come get them or they are going to the dumb next week. Only thing im charging for is 2 JXD 8 hoods $20 each both n...

Sold

Sale Pending

1977 Cyclone 440, New drive shaft and jack shaft bearings using JD bearings. New ski spindle bushing. New ski shocks and newer style single leaf springs. New Hewtech CDI box, and Hewtech rewound stator last year. New chain case tensioner and chain case oil. The rear suspension was completely taken a...

Harleysporter, I would like to get all the parts I need. Im hoping to get the mods done this winter when im not working on the car. I will send you a PM

Thanks

Thanks Harleysporter. I have seen on some old post that you have done this conversion more than once so I might have some questions for you when I get started. Helping my dad restore a 1955 ford crown Victoria right now and we want to get it done by spring so my free time has been with him working h...

I know members on this forum have narrowed and put 1980 Liquifire suspensions with cat tracks in there 76-78 Cyclones and Liquifires and call this suspension as close to 78 CC suspension as it gets. Is 80-84 the same suspension in all the fire series? im looking to do this conversion in one of my Cy...

I have been looking for a 1978 Cyclone 440 for a while and I'm always a day late or missed the sale. I've know about this sled for about a year and got the call today that he wanted to get rid of it so I dropped what I was doing and went and picked it up. The sled is in very good shape and very very...

That part number comes up for the mid mount snowmobiles with points ignition. Does the tach have a fuse in line of the yellow/red wire? If it does not then it will not work for you ignition

This is starting to get interesting that nobody can identify these rails. Yes I am positive the rails from a 77 are the same as a 76, as I have both. I also had some rails from the mid mounts to compare, as Jason showed in his pictures. What would be the benefit to moving the front pivot arm to the ...

I just started rebuilding my own idler wheels and have had good luck so far. Are you guys saying that the bearings I have been getting from McMaster will not hole up very long?

Does anybody know where to get the bushing that is in the driven sheave? Part#M 66381 Bushing. Not talking about the Nylon bushing in the helix.
This is for my Cyclones but I think this Driven clutch was used on the later models as well.

Thanks
Andy